How to DIY wallpaper

DIY wallpapering is always considered to be a complicated matter that must be done by professional workers, but it is not the case, as long as you master the method, it is relatively easy. Here is a way for everyone to paste wallpaper by themselves, DIY wallpaper is easy to grasp.

Pasting method of wallpaper

The following paste steps are for non-Peel and stick wallpaper, and the paste of Peel and stick wallpaper will be explained separately.

Before pasting the wallpaper, it is necessary to determine which color and pattern of wallpaper to choose. The prepared tools include: scraper, roller, brush, cutter, etc., and then follow the steps below:

1. Before painting wallpaper, pay attention to brushing the wall with a brush, pay attention to the dryness of the wall surface, and avoid the influence of dust and moisture on the paste. If the wall is uneven and has a hole, you have to use soil to fill it.

2. Use a ruler to measure the wall height of the wallpaper, and then start cutting the wallpaper. When cutting wallpaper, try to leave about 5 cm on each side, so that it can be processed at the corner in the future. Note that if there is a pattern on the wallpaper when cutting, pay attention to the beautiful stitching in the later stage.

3. After cutting the wallpaper, pour the base film into the bucket, put water into the bucket, and pay attention to the whereabouts of the wall.

4. Paste is a relatively important step. When pasted, it starts on one side of the wall and sticks out in one direction. The first wallpaper is usually attached to the edge of the door, then the stickers are applied from top to bottom. When pasting, the scraper scrapes laterally from side to side to remove the gas underneath. Separate the paper when it is separated, otherwise it is easy to get air bubbles when catching the paper. Hold the wallpaper against the wall. Then cut off the excess wallpaper at the ends. After pasting all the wallpaper, you can use a sponge and water to thoroughly wipe off the residual glue on the surface of the wallpaper.

5. After pasting the wallpaper, you need to cut the raw edges around the wallpaper. After leveling with the bezel, cut with a wallpaper knife. Watch out for wallpaper cuts on doors, windows, and power switches.

Wallpaper has a very important impact on the home effect, and in addition to choosing wallpaper suitable for space design, the construction of wallpaper is more important, which will make the space more beautiful.